Home arrow Products
Products Print

DiagProg III

ElproSys company has introcuded on the world market another modified standard of the portable computer called DiagProgIII. New equipment was designed with regard to demands of our customers, who were also kind of designers ,as they gave us many valuable piaces of advice and solutions that were used later. Those pieces of adviece were given to us during the time when DiagProgIII was being sold and used on the world market. We believe that simplified way of usage of new DiagProgIII will make your work even faster, easier and more efficient. New device is equipped with the possibilty totransfer into it new versions of the software - actualised versions are always avaliable on our web-site.
For the users (who are owners of the licence) of our diagnostic software we have prepared special offer of exchange old device into new one.


Technical performances of DiagProg III much surpass parameters of PCs:

  • 3 input - output lines, operation speed up to 8 MHz (0..5V)
  • 10 input - output lines, operation speed up to 4 MHz (0..5V)
  • 12 input lines, operation speed up to 16 MHz (0..5V)
  • 11 output lines, operation speed up to 16 MHz (0..5V)
  • 1 output lines, operation speed up to 1 Mhz
  • RS232 interface (voltage level 0..5 V and 0..15V)
  • CAN-BUS interface (in accordance with ISO 11898 standard) for low speed and high speed
  • CAN-BUS interface (GMW3089v2.4 General Motors Corporation specification)
  • CCD-BUS interface
  • BDLC interface (in accordance with SAE J1850)
  • 2 K-line interface (in accordance with ISO 9141 standard)
  • SPI interface (Master - Slave)
  • 2 analog input (0..15V)
  • +12 V, relay-driven output (5A)
  • +2..5 V, relay-driven output (1A)
  • PWM outputs, for timing generating
  • casing that can be use in car services
  • 4MB or 8MB flash-memory, expandable by MMC,MMC Plus or SD card
  • 320 x 240 colour display with 256 colours
  • touch screen controler with autocalibration
  • two board constuction what is simple and low cost in service
  • heavy-duty SD/MMC card connector
  • authorisation to 4000 programs by means of the Internet
  • service menu in six languages: Polish, English, German, French, Espaniol and Italian
  • specialised software, which enables data transfer between the appliance and a PC computer, attached to the tester
  • software update features through the Internet or by means of a USB 2.0
  • MMC,MMC Plus or SD card with FAT32
  • restore old MCU files without connecting to ElproSys server
  • Security Update fully trough internet

CodiProgUSB

CodiProg USB is a universal EEPROM tool witch allowes to read, edit and write various types of EEPROM memories. I2C, SPI and Microwire memory interfaces are supported. Device is communicating with PC through USB port. It allowes you to fully adjust main programming parameters like programming voltage, pull-up resistors, clock speed and read/write delays. It can load, edit and save files in *.bin, *.epp, and *.sec formats. CodiProg USB software includes ability to upgrade device firmware to enable support for new memory types. It is also possible to use some CodiProg features without PC computer control.

Erase EEPROM: M35080, M35080-3, M35080-6, M35080-VP, M35080-V6, D80D0WQ, M35080 6, M35080 VP, M35080 V6



CANGATEWAY

CANGATEWAY
CAN Gateway enables signal filtering from individual module in the car at various CAN bus speeds.


DiagProg II

In spite of permanent progress on PC market resulting in frequent alteration of software (operating systems) as well as operation parameters of personal computers - the ElproSys Company introduced to the marked the own standard of a portable computer, which is power-supplied from the vehicle diagnostic plug. It means, that in respect to the new appliance called DiagProg II we got rid of the problems related to non-compatibility and different operation clock rate of PC computers. The new device has a feature to update software version - current software release is always available from our web site. The new equipment has been designed purposely to meet needs of those customers who are not advanced PC users. Its easy-to-use features enable performing non-trouble service operation even by a car electrician.

Technical performances of DiagProg II much surpass parameters of PCs:

  • 11 input - output lines, operation speed up to 4 MHz (0..5V)
  • 12 input lines, operation speed up to 4 MHz (0..5V)
  • 11 output lines, operation speed up to 4 MHz (0..5V)
  • RS232 interface (voltage level 0..5 V and 0..15V)
  • CAN-BUS interface (in accordance with ISO 11898 standard)
  • K-line interface (in accordance with ISO 9141 standard)
  • SPI interface (Master - Slave)
  • analog output (0..15V)
  • +12 V, relay-driven output
  • 2 PWM outputs, for timing generating
  • casing that can be use in car services
  • flash-memory, options: 1 MB or 3 MB (for customer's order)
  • authorisation to 900 programs by means of the Internet, fax or telephone passwords
  • service menu in four languages: Polish, English, German and French
  • software update features through the Internet or by means of a standard RS 232 cable
  • specialised software, which enables data transfer between the appliance and a PC computer, attached to the tester


The V1 Generator
It is a device that is used for testing automobile speedometers and mileage counters - it allows to check their operational exactness and calibrate them. The appliance has a control to enable regulation of vehicle simulated speed. That parameter is stored in an ever-lasting memory - an EEPROM chip on the printed-circuit board. Three connectors are available from outside:
  • Power supply (+12 V)
  • Ground
  • Generator timing output - similar to the output of pulse generator installed inside a vehicle gear box.



CodiProg III
In response to fast market progress, for making the customer's work easier and more efficient, the ElproSys company introduces new device called CodiProg III. It was designed specially for customer's needs - we have resigned from the cooperation of CodiProg II connected to PC.
The simplification and improvement of work was achieved by integratingof compatible devices DiagProg II and CodiProg III. The new device does not involve theproblem of destroying the diagnosed devices.

CodiSys
The appliance used for programming integrated circuits that control dashboard equipment of various makes vehicles is a software product of ElproSys that has been known for quite a long time. Such programming is indispensable in several cases, e.g. when a faulty speedometer has been replaced and new settings must be entered according to old indications of the dashboard equipment. Depending on a version, the system makes also possible to repair programmable dashboard after breakdown and is one from only few appliances that enable in-circuit programming of microchips (with no need of de-soldering).
[ Back ]
Copyright 2009 Elprosys
ElproSys Automotive electronics, programming, chip tuning.